Adjustable Garden Hose Nozzle provides direct control over the water stream while watering plants or cleaning outdoor surfaces. Twist the clear nozzle head to change the flow from a wider, gentler spray to a narrower and stronger stream.

Its lightweight plastic body connects to a flexible garden hose through a stepped push-fit connector. The straight design is compact, easy to handle and convenient for everyday use.

Why Use It

• Adjustable water flow
• Simple twist control
• Lightweight plastic body
• Stepped push-fit hose connector
• Rubber rings help seal the nozzle
• Compact and easy to store
• Suitable for watering and cleaning
• No trigger needs to be held continuously

Product Details

The connector is designed to fit into the open end of a flexible garden hose. A hose clamp can be added when a tighter connection is required.

Spray Control

Twisting the clear head changes the shape and strength of the outgoing water.

• Use a wider, softer spray for pots, seedlings and delicate foliage.
• Use a medium flow for flower beds and general watering.
• Use a narrower stream for rinsing tools, floors, bicycles and vehicles.

Begin with low water pressure and adjust the nozzle until the required flow is reached.

Best Uses

Use the nozzle for:

• Watering potted plants
• Watering flower beds
• Reaching plants across a balcony
• Rinsing garden tools
• Washing pots and trays
• Cleaning patios and pathways
• Washing bicycles and motorcycles
• Light car washing
• General outdoor cleaning

For hands-free watering over a wider lawn area, use a 360° Rotating Lawn Sprinkler.

How to Connect

1. Push the open hose end firmly over the stepped yellow connector.
2. Position the hose far enough onto the connector to create a secure fit.
3. Add a suitable hose clamp if the connection loosens under water pressure.
4. Turn on the tap at low pressure and check the joint for leakage.
5. Twist the clear nozzle head to select the required water flow.

If the hose end is stiff, placing only the end in warm water for a short time can make it easier to fit over the connector.

Watering Tips

Use a soft spray around newly planted seedlings because a strong stream can uncover roots or move the growing medium.

Direct water towards the soil around established plants instead of continuously wetting their leaves. Watering in the morning or evening reduces rapid evaporation during hot weather.

Move between pots rather than keeping the stream in one place for too long.

Cleaning

Turn off the tap and release the remaining hose pressure after use. If the water pattern becomes uneven, remove the clear nozzle section and rinse away sand or mineral deposits.

Check that the rubber sealing rings remain seated correctly before reassembling the nozzle. Store it away from direct sunlight when it is not being used.

FAQs

Why is water leaking from the hose connection?

The hose may not be pushed far enough onto the stepped connector, or its internal diameter may be too large. Refit the hose and secure it with a properly sized clamp.

Why has the water flow become weak?

Check for a kinked hose, low tap pressure or dirt inside the nozzle. Remove the front section and rinse the internal opening with clean water.

Can it be used with a pressure washer?

No. This nozzle is intended for ordinary garden-hose water pressure and does not use pressure-washer fittings.

Why does the nozzle still drip after the tap is closed?

Water remaining inside the hose can continue leaving for a short time. Lift the hose or open the nozzle fully to release the trapped water before storage.

Common Names: Garden Hose Nozzle, Adjustable Water Sprayer, Twist Hose Nozzle, Pipe Nozzle, Watering Nozzle